Ujwal Metal & Tubes
Grant Road, Mumbai, Maharashtra
SEND SMS
SEND EMAIL
Product Details:
| Minimum Order Quantity | 1000 Kilogram |
| Thickness | >5 mm |
| Material Grade | HARDOX 400 |
Ujwal metal & tubes is one of the leading importer & stockist of Hardox 400 steel. It has been tried in amazingly requesting conditions obliging high quality and fabulous scraped abrasion resistance. Hardox 400 (hardness 380-420 HBW) is a solidified steel, especially suited for long haul use in grating situations with high surface weight.
Our clients esteem the great cutting, bending and welding properties of Hardox 400 which makes workshop treatment simpler and more effective handling. Hardox 400 is accessible additionally as prepared to-weld parts, which accelerates your generation and makes it simpler than at any other time in recent memory.
Chhajed Steel & Alloys Pvt. Ltd. is one of the leading importer & stockist of Hardox 400 steel. It has been tried in amazingly requesting conditions obliging high quality and fabulous scraped abrasion resistance. Hardox 400 (hardness 380-420 HBW) is a solidified steel, especially suited for long haul use in grating situations with high surface weight.
Our clients esteem the great cutting, bending and welding properties of Hardox 400 which makes workshop treatment simpler and more effective handling. Hardox 400 is accessible additionally as prepared to-weld parts, which accelerates your generation and makes it simpler than at any other time in recent memory.
HARDOX 400 BRINEL HIGH STRENGTH AND ABRASION RESISTANT PLATE
Through Hardened for Long Wear Life
Superb Cold Bending & Welding Properties
High Impact Properties
Flat Clean, Shot Blasted and Primed Finished Products
Grain-Refined
MATERIAL APPLICATION
Conveyors
Dump Truck Bodies
Loading Buckets & Bulldozers
Chutes
Crushers
CHEMICAL COMPOSITION
| Grade | C max | Mn max | P max | S max | Si max | Cr max | Ni max | Mo max | B max | V | Other Element |
|---|---|---|---|---|---|---|---|---|---|---|---|
| Hardox 400 | 0.20 | 1.60 | 0.025 | - | 0.70 | 0.80 | 1.00 | 0.80 | 0.005 | - |
MECHANICAL PROPERTIES
| Tensile Strength | Yield Strength | ||||
|---|---|---|---|---|---|
| Grade | Origin | Mpa | Mpa | Elongation in 2 inches (min.)% | Brinell Hardness |
| Hardox 400 | Sweden | 1250 | 1000 | 10 | 360-440 |
Additional Information:
Product Details:
| Minimum Order Quantity | 1000 Kilogram |
| Thickness | 4-5 mm, >5 mm |
| Material Grade | HARDOX 500 |
Hardox 500, Hardox 500 wear plates, Hardox 500 wear resistant steel plates is a bendable and the weldable abrasion resistant plate which is utilized as a part of uses that request higher wear resistance.
Hardox 500 is not planned for further every heat treatment. It has gotten its mechanical properties by extinguishing and when fundamental by method for ensuing treating. The properties of the conveyance condition can't be held after introduction to temperatures in abundance of 250 C. Fitting well being and security insurances must be taken when welding, cutting, crushing or generally dealing with this item.
Crushing, particularly of first stage covered plates, may create dust with a high molecule focus.
Our extent is resistant to abrasion and is utilized as a part of different applications that oblige higher wear resistance. Also, these are utilized as a part of cradle receptacles, grizzly bars, measuring containers and skips, crushers, strainers, feeders, measuring pockets, skips, bleeding edges, transports, cans, blades, apparatuses, and sprockets. We are one of the bigest Importer,Stockist & Supplier of HARDOX 500 Plates in India.
AVAILABLE DIMENSIONS HARDOX 500: Thicknesses of 4.0 - 80 mm.
CHEMICAL COMPOSITION
| C * | Si * | Mn * | P | S | Cr * | Ni * | Mo * | B * |
|---|---|---|---|---|---|---|---|---|
| Max % | Max % | Max % | Max % | Max % | Max % | Max % | Max % | Max % |
| 0.30 | 0.70 | 1.60 | 0.020 | 0.010 | 1.50 | 1.5 | 0.60 | 0.005 |
MECHANICAL PROPERTIES
| Thickness | Hardness HBW | Typical yield strength |
|---|---|---|
| Mm | min - max 1) | MPa, not guaranteed |
| 4 - 32 | 470 - 530 | 1250 |
| (32) - 80 | 450 - 540 | 1250 |
Brinell hardness, HBW, as per EN ISO 6506-1, on a processed surface 0.5 - 3 mm beneath surface. No less than one test example for every heat and 40 tons.
The ostensible material thickness won't go amiss more than + 15 mm from that of the test examples.
The plates are through-solidified to at least 90 % of the ensured least surface hardness
Additional Information:
